Single Prop Disassembly Machine
High Disassembly Efficiency: Capable of dismantling severely rusted props with large clamping torque, significantly improving maintenance speed.
Multifunctional Operation: Handles base plates, handle bodies, top covers, and plunger assemblies in a single machine.
Robust & Low-Noise Design: Belt-driven transmission ensures strong overload capacity and quiet operation.
Superior Clamping System: Eccentric bidirectional chuck provides higher rigidity and clamping force than conventional methods.
Mechanized Process: Combines mechanical and hydraulic clamping for efficient, labor-saving disassembly.
Product Introduction
The LCZ-4500 Single Prop Disassembly Machine is a specialized equipment designed for disassembling single hydraulic props. It features large clamping torque, high disassembly efficiency, excellent maintenance quality, and reduced labor intensity. It can dismantle severely rusted props that are difficult to disassemble with conventional equipment, achieving a largely mechanized disassembly process. This enhances the mechanization level of maintenance work and accelerates the disassembly and repair process, making it one of the best disassembly devices currently available in China.
The machine has the following characteristics:
It can perform disassembly tasks for base plates, handle bodies, top covers, and plunger assemblies, achieving multifunctional capabilities with a single machine.
The belt drive between the main motor and reducer provides strong overload capacity and low noise. The spindle is equipped with an eccentric bidirectional self-tightening chuck, offering high rigidity and greater clamping force compared to conventional chucks or other clamping methods, ensuring convenient and labor-saving operation.
The combination of mechanical and hydraulic clamping achieves a largely mechanized disassembly process.
Technical Specifications
The main technical specifications of the LCZ-type suspended prop disassembly machine are shown in the table below:
| Name | Item | Specification | Unit |
|---|---|---|---|
| Overall Dimensions （Length × Width × Height） | 6500 × 1000 × 900 | mm | |
| Machine Weight | 2500 | kg | |
| Prop Cylinder Bore(Inner Diameter) | 100-125 | mm | |
| rop Height ( Disassembly Height) | ≤4500 | mm | |
| Pump Station Pressure | 20 | MPa | |
| Flow Rate | ≤30 | L/min | |
| Working Medium | No. 46 Hydraulic Oil | ||
| Main Motor | Power | 5.5 | kW |
| Voltage | 380 | V | |
| Speed | 960 | rpm | |
| Main Reducer | High-Speed Shaft Allowable Power | 5.5 | kW |
| Low-Speed Shaft Max. Torque | Tmax= 7.4 | mm | |
| Total Reduction Ratio | I = 2.25 × 31.5 = 71.19 | ||
| Clamping Frame Hydraulic Cylinder | Working Force | 50 | kN |
| Pulling Stroke | 25 | mm | |
| Disassembly Jack | Working Force (Push/Pull) | 115 / 59 | kN |
| Working Stroke | 2100 | mm |
